ALSAN TRAFIK RS 730 Field
ALSAN TRAFIK RS 730 Field
ALSAN TRAFIK RS 730 FIELD is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN TRAFIK RS 730 FIELD resin is combined with ALSAN RS FLEECE to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN TRAFIK RS 730 FIELD is available in summer or winter formulations.
Product Properties
- Material PMMA
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of this PDS. Apply without dilution or thinning.
After mixing, apply ALSAN TRAFIK RS 730 FIELD to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN TRAFIK RS Roofing Technical Manual for additional application guidelines.
Related Products
SOPRALAP STICK
SOPRALAP STICK is an SBS-modified bitumen cover strip for use with SOPRASMART Laminated Board products. SOPRALAP STICK is reinforced with…
View ProductSENTINEL® WALKWAY PAD
SENTINEL WALKWAY PAD is an extruded roll made from polyvinyl chloride (PVC) membranes. It protects the roof membranes from damage…
View ProductBitutak Cold Smooth
BITUTAK® Cold is a 3.8 mm (150 mils) APP (Atactic Polypropylene) modified bitumen roofing membrane for approved multi-ply membrane and…
View ProductRelated Projects
World Vision – Federal Way, Washington
When looking for a quality roof system that would have minimal impact on everyday operations and overall budget, Wayne’s Roofing, Inc. selected SOPREMA’s SOPRASMART® product line. Not only was SOPRASMART® an affordable product, it also offered time and labor savings.
DFW International Airport – Dallas, Texas
The Dallas Fort Worth International Airport (DFW) became one of the first major U.S. airports to go carbon neutral in 2016, and since then, the facility has only accelerated its sustainability efforts. When ELASTOPHENE® and SOPRALENE® with ECO3 granules were specified for the roofs of DFW’s Terminal F Skylink buildings, it represented a new level of commitment to our planet.