ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN RS 230 FLASH is a high-performance, rapidsetting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN RS 230 FLASH resin is combined with ALSAN RS FLEECE to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FLASH is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10 – 15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of this PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® COATING AC 401 FLASHING
ALSAN COATING AC 401 FLASHING is a high quality, fiber-fortified, water-based, acrylic elastomeric roof mastic. Upon cure, ALSAN COATING AC…
View ProductSOPRANATURE® DRAIN PLATE 60
SOPRANATURE DRAIN PLATE 60 is a 2.5 in tall, three-dimensional plastic drainage structure for green roofing systems. Unlike thin, flexible…
View ProductALSAN TRAFIK PU 120
ALSAN Trafik PU 120 is a two-component, low VOC, low odor, liquid applied primer. This primer provides excellent inter-coat adhesion…
View ProductRelated Projects
San Francisco War Memorial – San Francisco, California
SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.
Museum of the American Revolution – Philadelphia, Pennsylvania
Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.