ELASTOCOL™ STICK SKU: 38745
ELASTOCOL™ STICK SKU: 38745
ELASTOCOL STICK is an SBS polymer based primer approved for use in roofing, walls and waterproofing assemblies. ELASTOCOL STICK is comprised of a proprietary blend of SBS polymers, solvents and additives engineered to increase adhesion of self-adhered SBS membranes on approved substrates.
Product Properties
- Base Solvent-Based
- Overlying Application Self-Adhered
- Type Primer
Installation
Thoroughly mix ELASTOCOL STICK prior to application. ELASTOCOL STICK is applied to the approved area via brush, roller or spray equipment.
Approximate coverage rates (non-porous substrates):
• Roofing: 70 to 100 square feet per gallon (0.7 to 1 gallons per 100 square feet)
• Walls and foundations: 350 square feet per gallon
Surface profile and porosity of the substrate will affect the coverage rates.
Ensure primer is tacky to-the-touch, but not wet before installing overlying membrane. Primer should not transfer to the fingertips when touched.
Testing & Approvals
Related Products
SOPRADRAIN™ 102/102PF
SOPRADRAIN 102 is a versatile workhorse that delivers first-rate protection for waterproofing systems. Faced with a non-woven fabric layer, this…
View Product
SOPRA-TITE Coping
SOPRA-TITE Coping offers a full snap-on design in 12 foot lengths with pre-punched fastening holes to ensure proper attachment to…
View Product
SOPRALENE® 180 PS 3.0
SOPRALENE 180 PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE…
View ProductRelated Projects
U.S. Treasury Building – Washington DC
The Treasury Building is the oldest departmental building in Washington and has had a great impact on the design of other governmental buildings. At the time of its completion, it was one of the largest office buildings in the world.
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.