SOPRALENE® FLAM 180 SKU: 00410
SOPRALENE® FLAM 180 SKU: 00410
SOPRALENE® Flam 180 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam 180 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE Flam 180 onto the roof surface and allow to relax. Position SOPRALENE Flam 180 in desired position and back roll the product. SOPRALENE Flam 180 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Flam 180 via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® RS 230 FIELD
ALSAN RS 230 FIELD is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 FIELD resin is combined…
View Product
SOPRASEAL® LM 202 VP
SOPRASEAL LM 202 VP is a one-component spray applied vapor-permeable air barrier membrane used in wall construction. SOPRASEAL LM 202…
View Product
ALSAN TRAFIK PU 120
ALSAN Trafik PU 120 is a two-component, low VOC, low odor, liquid applied primer. This primer provides excellent inter-coat adhesion…
View ProductRelated Projects
San Francisco Airport – San Francisco, California
San Francisco International Airport is the 13th largest airport in the United States featuring four modern runways. The new International Terminal opened in 2000 and had the distinction of being the largest terminal building ever built in North America. SOPREMA was able to provided a cost-competitive, UL Class A system with a 20-year labor and material warranty.
First Market Tower – San Francisco, California
Multiple SOPREMA systems were installed on this 23,500 square foot project. From the COLPHENE H hot applied, rubberized asphalt system to the use of ALSAN RS for the complex details, there was a solution for every aspect of this project.