ELASTOPHENE® FLAM SKU: 00400
ELASTOPHENE® FLAM SKU: 00400
ELASTOPHENE® Flam is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE Flam onto the roof surface and allow to relax. Position ELASTOPHENE Flam in desired position and back roll the product. ELASTOPHENE Flam is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRA-TITE Cantilever Coping
SOPRA-TITE Cantilever Coping is designed for attachment to a parapet wall with a non-structural exterior building façade. Support brackets offer…
View Product
SOPRANATURE® DRAIN BOX
Manufactured from recycled acrylonitrile-butadiene-styrene (ABS) with narrow slots on the sidewalls and small holes on the top cover, SOPRANATURE DRAIN…
View Product
ELASTOPHENE® SP 2.2
ELASTOPHENE SP 2.2 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies….
View ProductRelated Projects
TD Bank – Boston, Massachusetts
In 2017, TD Bank expanded its locations to South Boston, Massachusetts. When looking for a vapor permeable spray application with multiple advantages, SOPREMA’s SOPRASEAL® LM 202 VP was selected.
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.