SOPRALENE® 180 SANDED 2.2 SKU: 00568
SOPRALENE® 180 SANDED 2.2 SKU: 00568
SOPRALENE 180 Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 87 mils (2.2 mm)
- Thickness (nominal) 94 mils (2.4 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 Sanded 2.2 onto the roof surface and allow to relax. Place SOPRALENE 180 Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer’s guidelines. SOPRALENE 180 Sanded 2.2 is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 Sanded 2.2 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
ELASTOPHENE® FLAM FR GR
ELASTOPHENE® Flam FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View Product
SOPRASEAL® Xpress G
SOPRASEAL Xpress G is an exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to…
View Product
ANTIROCK® PRIMER
ANTIROCK Primer is a blend of SBS modified bitumen, fast-evaporating solvents, and adhesive enhancing additives. It is used to prime…
View ProductRelated Projects
Fashion Institute of Technology – New York City, New York
The Fashion Institute of Technology needed a new roof on Building E in the dead of winter. In addition they wanted a low odor, green solution. The answer, SOPREMA’s advanced ALSAN RS 260 LO PMA liquid membrane system.
JP Morgan Chase – New York, New York
JP Morgan Chase turned to SOPREMA for a permanent solution to several unique waterproofing issues. The answer was a fully reinforced, low odor ALSAN RS 260 LO PMA System with a slip resistant surfacing layer that offers a 20 year guaranteed waterproofing solution.