SOPRAFIX® BASE 612 SKU: 00425
SOPRAFIX® BASE 612 SKU: 00425
SOPRAFIX BASE 612 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 612 is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Mechanically Attached
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRAFIX BASE 612 onto the roof surface and allow to relax. Place SOPRAFIX BASE 612 in desired position. SOPRAFIX BASE 612 is mechanically fastened through the side laps using the appropriate fastener. Subsequent approved inter-ply or cap ply membranes are applied to SOPRAFIX BASE 612 via heat welding.
Testing & Approvals
Related Products
DUOTACK® SPF HFO ADHESIVE
DUOTACK SPF HFO Adhesive is a low pressure, two-component spray polyurethane foam adhesive formulated for adhering SENTINEL HFB (heavy…
View Product
ALSAN® RS 260 LO FLASH
ALSAN RS 260 LO FLASH is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications….
View Product
SENTINEL® KEE P150 HFB
SENTINEL KEE P150 HFB is a high-performance, fleece-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope…
View ProductRelated Projects
Coronado Community Center – Coronado, California
Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.
205 AVENUE C – New York, New York
SOPRASMART® laminated boards combine the roof membrane and coverboard into one installation layer, saving the installer time and labor. This patented product is the first and only in its category, bringing material savings to the equation as well.