ELASTOPHENE® SANDED 3.0 SKU: 00251
ELASTOPHENE® SANDED 3.0 SKU: 00251
ELASTOPHENE® Sanded 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness 118 mils (3.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE Sanded 3.0 onto the roof surface and allow to relax. Place ELASTOPHENE Sanded 3.0 in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer specifications. ELASTOPHENE Sanded 3.0 is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Sanded 3.0 via cold adhesive or hot asphalt. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
ANTIROCK®
ANTIROCK and ANTIROCK Starter are SBS-modified bitumen membranes designed to waterproof bridge decks. ANTIROCK is composed of a proprietary formulation…
View Product
SOPRALAST® 50 TV ALU
SOPRALAST 50 TV ALU is a SBS-modified bitumen membrane used in roofing assemblies. SOPRALAST 50 TV ALU is reinforced with…
View Product
ALSAN® RS FLEECE
ALSAN RS FLEECE is a proprietary non-woven, polyester reinforcement used in ALSAN RS roofing and ALSAN TRAFIK RS waterproofing applications….
View ProductRelated Projects
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.
First Market Tower – San Francisco, California
Multiple SOPREMA systems were installed on this 23,500 square foot project. From the COLPHENE H hot applied, rubberized asphalt system to the use of ALSAN RS for the complex details, there was a solution for every aspect of this project.