SOPRALENE® STICK SKU: 00153
SOPRALENE® STICK SKU: 00153
SOPRALENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Self Adhered
- Reinforcement Polyester
- Thickness (minimum) 98 mils (2.5 mm)
- Thickness (nominal) 106 mils (2.7 mm)
- Topside Sanded
- Underside Release Film
Installation
Prior to installation, unroll SOPRALENE Stick onto the roof surface and allow to relax. Place SOPRALENE Stick in desired position. Remove the protective release film from the underside of the sheet and roll SOPRALENE Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Stick via self-adhered or cold adhesive applications. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
INSONOMAT
INSONOMAT is an acoustic membrane made with a base of elastomeric bitumen and recycled rubber. INSONOMAT was developed specifically for…
View Product
INSONOFLOOR
INSONOFLOOR is a high density polyethylene membrane coated with small granules of recycled rubber. INSONOFLOOR is specially designed to soundproof…
View Product
SOPRAWAY NG2
SOPRAWAY NG2 is an anti-fracture acoustic membrane intended for ceramic tiles floors. The SOPRAWAY NG2 membrane allows the direct application…
View ProductRelated Projects
York Elementary School – Raleigh, North Carolina
Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.
Airport High School – West Columbia, South Carolina
Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.