SOPRALENE® FLAM STICK SKU: 06010
SOPRALENE® FLAM STICK SKU: 06010
SOPRALENE Flam Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Self Adhered
- Reinforcement Polyester
- Thickness (minimum) 94 mils (2.4 mm)
- Thickness (nominal) 102 mils (2.6 mm)
- Topside Burn Off Film
- Underside Release Film
Installation
Prior to installation, unroll SOPRALENE Flam Stick onto the roof surface and allow to relax. Place SOPRALENE Flam Stick in desired position. Remove the protective release film from the underside of the sheet and roll SOPRALENE Flam Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Flam Stick via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® P200
SENTINEL P200 is a high-performance, bare-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope applications. SENTINEL…
View Product
SOPRA-TITE SENTINEL® Fascia
SOPRA-TITE SENTINEL® Fascia combines custom engineering and superior performance with an attractive appearance. The design of the extruded aluminum anchor…
View Product
Twin Loc Nail
Twin Loc-Nail/Stress Plate pre-assembled units are used to secure base sheet, approved thermal insulations and cover boards to approved roof…
View ProductRelated Projects
JP Morgan Chase – New York, New York
JP Morgan Chase turned to SOPREMA for a permanent solution to several unique waterproofing issues. The answer was a fully reinforced, low odor ALSAN RS 260 LO PMA System with a slip resistant surfacing layer that offers a 20 year guaranteed waterproofing solution.
Placer County Water Agency – Auburn, California
In 2015, the Placer County Water Agency took on a tear-off roofing project, in which SOPREMA products were used. SOPREMA was the right choice for this project because the breadth of products met the designer’s needs, including meeting California Title 24 energy efficiency standards with the use of ENERGY STAR® rated SOPRASTAR® Flam. Another appealing aspect was the versatility of SENTINEL® P150, which allowed coverage for the vertical walls throughout the roofing system.