SOPRALENE® 250 SP 4.0 SKU: 00603
SOPRALENE® 250 SP 4.0 SKU: 00603
SOPRALENE 250 SP 4.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 250 SP 4.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE 250 SP 4.0 onto the roof surface and allow to relax. Position SOPRALENE 250 SP 4.0 in desired position and back roll the product. SOPRALENE 250 SP 4.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 250 SP 4.0 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
INSONOFLOOR
INSONOFLOOR is a high density polyethylene membrane coated with small granules of recycled rubber. INSONOFLOOR is specially designed to soundproof…
View Product
ACOUSTIDRAIN
ACOUSTIDRAIN is a revolutionary acoustic product that eliminates the noise caused by water flowing in indoor sanitary drainage or fall…
View Product
SOPRANATURE® DRAIN PLATE 25
SOPRANATURE DRAIN PLATE 25 is a 1 in tall, three-dimensional plastic drainage structure for green roofing systems. Unlike thin, flexible…
View ProductRelated Projects
World Vision – Federal Way, Washington
When looking for a quality roof system that would have minimal impact on everyday operations and overall budget, Wayne’s Roofing, Inc. selected SOPREMA’s SOPRASMART® product line. Not only was SOPRASMART® an affordable product, it also offered time and labor savings.
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.