SOPRALENE® 180 PS 2.2 SKU: 00569
SOPRALENE® 180 PS 2.2 SKU: 00569
SOPRALENE 180 PS 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 PS 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin (P) burn-off film and the underside is surfaced with fine mineral aggregate (S) to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 83 mils (2.1 mm)
- Thickness (nominal) 91 mils (2.3 mm)
- Topside Burn Off Film
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 PS 2.2 onto the roof surface and allow to relax. Place SOPRALENE 180 PS 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 180 PS 2.2 is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 PS 2.2 via heat welding. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRAMASTIC™ SBS ELASTIC CEMENT
SOPRAMASTIC SBS Elastic Cement is a modified bitumen mastic for use in approved multi-ply membrane, flashing and waterproofing assemblies. SOPRAMASTIC…
View Product
SOPRA-TITE SENTINEL® Drip Edge
SOPRA-TITE SENTINEL® Drip Edge combines custom engineering and superior performance with an attractive appearance. The patented design of the extruded…
View Product
ALSAN® RS FLEECE
ALSAN RS FLEECE is a proprietary non-woven, polyester reinforcement used in ALSAN RS roofing and ALSAN TRAFIK RS waterproofing applications….
View ProductRelated Projects
Carrick High School – Pittsburgh, Pennsylvania
In 2017, Carrick High School’s roof was ready to be replaced. It was decided the best option was to tear off the previous roof and start fresh. Due to the relationship the architect, HHSDR Architects / Engineers, has with SOPREMA, the system that was selected to replace the previous roof included: SOPRA-ISO®, SOPRABOARD®, SOPRALENE® Flam Stick and SOPRALENE FLAM 180 FR GR.
First Market Tower – San Francisco, California
Multiple SOPREMA systems were installed on this 23,500 square foot project. From the COLPHENE H hot applied, rubberized asphalt system to the use of ALSAN RS for the complex details, there was a solution for every aspect of this project.