SOPRALENE® 250 SANDED SKU: 00231
SOPRALENE® 250 SANDED SKU: 00231
SOPRALENE 250 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 250 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 250 Sanded onto the roof surface and allow to relax. Place SOPRALENE 250 Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 250 Sanded is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 250 Sanded via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® RS Cleaner
ALSAN RS CLEANER is a solvent-based solution specially formulated to clean and reactivate fully cured, in-place ALSAN RS membranes. ALSAN…
View Product
ELASTOCOL™ 350
ELASTOCOL™ 350 is a zero VOC, water based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL 350…
View Product
SOPRADRAIN™ ECOVENT
SOPRADRAIN ECOVENT is a geometric patterned core drainage mat designed to eliminate hydrostatic pressure on vegetated roofs, foundation walls, retaining…
View ProductRelated Projects
The Westin Savannah Harbor – Savannah, Georgia
The Westin was due for a roof replacement on 17,828 square feet of its property. To complete the project, SOPREMA’s SOPRAISO ™, DUOTACK®, SENTINEL® P-150, and ALSAN® RS 230 Flash were selected. These products allowed for the design to meet FM 1-120 codes and the use of ALSAN RS 230 Flash solved any difficult flashing details which was only one of many reasons
SOPREMA products were selected.
American Airlines Center – Dallas, Texas
On March 21, 2022, a leaky roof on Dallas' American Airlines Center delayed the start of an NBA game between the hometown Mavericks and the Minnesota Timberwolves, and after the issue surfaced again a couple months later to interfere with a Mavs playoff game, quick action was needed to replace the building's 20-year-old roof.