SOPREMA

Search

SOPRALENE® 180 SANDED SKU: 00220

SOPRALENE® 180 SANDED SKU: 00220

SOPRALENE 180 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Polyester
  • Thickness (minimum) 110 mils (2.8 mm)
  • Thickness (nominal) 118 mils (3.0 mm)
  • Topside Sanded
  • Underside Sanded

Installation

Prior to installation, unroll SOPRALENE 180 Sanded onto the roof surface and allow to relax. Place SOPRALENE 180 Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer’s guidelines. SOPRALENE 180 Sanded is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 Sanded via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.

 

Testing & Approvals

Related Products

SOPRAFIX® BASE 614

SOPRAFIX BASE 614 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 614…

View Product

COLPHENE® BSW H

COLPHENE BSW H is an SBS-modified bitumen waterproofing membrane for use in approved blind side/under slab waterproofing assemblies. COLPHENE BSW…

View Product

SOPRA-XPS 30

SOPRA-XPS 30 are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 30 is mainly used as a…

View Product

Related Projects

Bellevue Hospital Center – New York, New York

Bellevue, the nations oldest medical center, is protected by SOPREMA’s ALSAN RS 260 LO PMA liquid membrane technology. In the dead of winter, with strict project parameters, SOPREMA’s ALSAN RS created an impenetrable liquid waterproofing membrane guaranteed to be waterproof for 20 years with a life expectancy of 25 to 30 years.

Perry Monument – Put-in-Bay, Ohio

At 352-feet, it is among the tallest monuments. The world’s most massive Doric column was constructed by a multi-state commission from 1912 to 1915 “to inculcate the lessons of international peace by arbitration and disarmament”.