ELASTOPHENE® ULTRA-STICK SKU: 01435
![ultra-stickbasemembranepicture132119989487601193.png](https://soprema.us/wp-content/uploads/2020/08/ultra-stickbasemembranepicture132119989487601193.png)
ELASTOPHENE® ULTRA-STICK SKU: 01435
ELASTOPHENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE ULTRA-STICK is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self adhesive bottom layer and is reinforced with a high quality random glass fiber mat. The topside incorporates a unique surface film for promoting superior adhesion of subsequent plies and the underside is surfaced with a protective split back release film that is removed during application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Self Adhered
- Reinforcement Glass Fiber
Installation
Prior to installation, unroll ELASTOPHENE ULTRA-STICK onto the roof surface and allow to relax. Place ELASTOPHENE ULTRA-STICK in desired position. Remove one side of the ELASTOPHENE ULTRA-STICK split back release film and use hand pressure to adhere exposed high tack bottom layer. Remove the other half of the ELASTOPHENE ULTRA-STICK’s release film and roll the entire surface of the sheet with a weighted roller. Subsequent approved cap ply membranes are applied to ELASTOPHENE ULTRA-STICK via self-adhered or heat welded application. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
![UL](https://soprema.us/wp-content/uploads/2020/09/UL-26.jpg)
Related Products
SOPRAMASTIC™ SP1
SOPRAMASTIC™ SP1 is a moisture cured polyether sealant for use in approved multi-ply membrane and flashing assemblies. SOPRAMASTIC SP1 is…
View Product![](https://soprema.us/wp-content/uploads/2020/08/153_IMG_COLPHENE-Stick_3.jpg)
COLPHENE® STICK
COLPHENE® Stick SBS-modified bitumen, self-adhered base ply reinforced with a tough, dimensionally stable nonwoven polyester mat. A fine mineral aggregate on the topside facilitates self-adhered and cold-adhesive applications.
View Product![](https://soprema.us/wp-content/uploads/2020/08/205_IMG_ELASTOPHENE-Sanded3.0_1.jpg)
ELASTOPHENE® SANDED 3.0
ELASTOPHENE® Sanded 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded…
View ProductRelated Projects
San Francisco War Memorial – San Francisco, California
SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.