SOPRALENE® ULTRA-STICK SKU: 01427
![ultra-stickbase132131399253836743.png](https://soprema.us/wp-content/uploads/2020/08/ultra-stickbase132131399253836743-369x700.png)
SOPRALENE® ULTRA-STICK SKU: 01427
SOPRALENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. SOPRALENE ULTRA-STICK is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self-adhesive bottom layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with a unique surface film for superior self-adhered application and the underside is surfaced with a protective split back release film that is removed during application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Self Adhered
- Reinforcement Polyester
- Thickness (minimum) 94 mils (2.4 mm)
- Thickness (nominal) 102 mils (2.6 mm)
Installation
Prior to installation, unroll SOPRALENE ULTRA-STICK onto the roof surface and allow to relax. Place SOPRALENE ULTRA-STICK in desired position. Remove one side of the SOPRALENE ULTRA-STICK’s split back release film and use hand pressure to adhere exposed high tack bottom layer. Remove the other half of the SOPRALENE ULTRA-STICK’s release film and roll the entire surface of the sheet with a weighted roller. Subsequent approved cap ply membranes are applied to SOPRALENE ULTRA-STICK via self-adhered or heat welded application. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
![UL](https://soprema.us/wp-content/uploads/2020/09/UL-27.jpg)
Related Products
ALSAN® RS LO Primer
ALSAN® RS LO Primer is a 100% solids, low-odor epoxy used to promote adhesion to metals, concrete, masonry, wood, and…
View Product![](https://soprema.us/wp-content/uploads/2020/08/Elastophene_SP.png)
COLPHENE® 180 SP
COLPHENE® 180 SP is an SBS-modified bitumen base ply reinforced with fine mineral aggregate. The underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Product![](https://soprema.us/wp-content/uploads/2020/08/144_img_colphene3000_2130991588864992529.jpg)
COLPHENE® 3000
COLPHENE® 3000 is a self-adhered, SBS-modified bitumen membrane. The topside is surfaced with a tri-laminated woven polyethylene facer and the underside is surfaced with a silicone release film.
View ProductRelated Projects
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.
Flatiron Building – New York, New York
The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.