SOPRALENE® 180 PS 3.0 SKU: 00550
SOPRALENE® 180 PS 3.0 SKU: 00550
SOPRALENE 180 PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 PS 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin (P) burn-off film and the underside is surfaced with fine mineral aggregate (S) to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 PS 3.0 onto the roof surface and allow to relax. Place SOPRALENE 180 PS 3.0 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 180 PS 3.0 is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 PS 3.0 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
ELASTOPHENE® SANDED 2.2
ELASTOPHENE® Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded…
View Product
INSONO AF3-90
INSONO AF3-90 is composed of self-adhesive elastomeric bitumen with an exposed non-woven polyester reinforcement. The underside is surfaced with a…
View Product
2-1 SOPRASMART ISO HD
2-1 SOPRASMART HD is a high performance panel of an SBS-modified bitumen base membrane and high density polyisocyanurate insulation board….
View ProductRelated Projects
DFW International Airport – Dallas, Texas
The Dallas Fort Worth International Airport (DFW) became one of the first major U.S. airports to go carbon neutral in 2016, and since then, the facility has only accelerated its sustainability efforts. When ELASTOPHENE® and SOPRALENE® with ECO3 granules were specified for the roofs of DFW’s Terminal F Skylink buildings, it represented a new level of commitment to our planet.
Coronado Community Center – Coronado, California
Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.