ELASTOPHENE® STICK SKU: 00571
ELASTOPHENE® STICK SKU: 00571
ELASTOPHENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Self Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Release Film
Installation
Prior to installation, unroll ELASTOPHENE Stick onto the roof surface and allow to relax. Place ELASTOPHENE Stick in desired position. Remove the protective release film from the underside of the sheet and roll ELASTOPHENE Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Stick
via self-adhered or cold adhesive applications. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
ELASTOPHENE® FLAM HS FR GR
ELASTOPHENE® Flam HS FR GR (high strength, fire retardant, granules) is an SBS modified bitumen cap ply for use in…
View Product
COLPHENE® BSW V
COLPHENE® BSW V is an SBS-modified bitumen, self-adhered waterproofing membrane for use in approved blind side waterproofing assemblies. COLPHENE BSW…
View Product
ELASTOPHENE® FLAM HR 3.0
ELASTOPHENE® Flam HR 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…
View ProductRelated Projects
First Market Tower – San Francisco, California
Multiple SOPREMA systems were installed on this 23,500 square foot project. From the COLPHENE H hot applied, rubberized asphalt system to the use of ALSAN RS for the complex details, there was a solution for every aspect of this project.
TD Bank – Boston, Massachusetts
In 2017, TD Bank expanded its locations to South Boston, Massachusetts. When looking for a vapor permeable spray application with multiple advantages, SOPREMA’s SOPRASEAL® LM 202 VP was selected.