ELASTOPHENE® PS 2.2 SKU: 00500
ELASTOPHENE® PS 2.2 SKU: 00500
ELASTOPHENE® PS 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Burn Off Film
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE PS 2.2 onto the roof surface and allow to relax. Place ELASTOPHENE PS 2.2 in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer specifications. ELASTOPHENE PS 2.2 is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE PS 2.2 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® KEE P150 HFB
SENTINEL KEE P150 HFB is a high-performance, fleece-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope…
View Product
COLPHENE® SP 2.2
COLPHENE® SP 2.2 (sanded, polyolefin) is (SBS) polymer-modified bitumen reinforced with a high-quality random glass fiber mat. The topside is covered with fine mineral aggregate. The underside is surfaced with polyolefin burn-off film.
View Product
SOPRALENE® FLAM 180
SOPRALENE® Flam 180 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam…
View ProductRelated Projects
Woodridge Middle School – Peninsula, Ohio
With a tight schedule to meet, Woodridge Middle School was relying on SOPREMA’s SENTINEL products to do the job. The previous shingle and PVC roof was replaced with SOPRA-ISO, and tan SENTINEL P150 HFB. The gutters were then lined with ALSAN RS 222 primer and ALSAN RS 230 Flash.
TD Bank – Boston, Massachusetts
In 2017, TD Bank expanded its locations to South Boston, Massachusetts. When looking for a vapor permeable spray application with multiple advantages, SOPREMA’s SOPRASEAL® LM 202 VP was selected.