ELASTOPHENE® PS 3.0 SKU: 00504
ELASTOPHENE® PS 3.0 SKU: 00504
ELASTOPHENE® PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is a reinforced with high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Scrim
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE PS 3.0 onto the roof surface and allow to relax. Place ELASTOPHENE PS 3.0 in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer specifications. ELASTOPHENE PS 3.0 is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE PS 3.0 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRALENE® ULTRA-STICK
SOPRALENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. SOPRALENE ULTRA-STICK…
View Product
ACOUSTIVIBE Sound Insulating System
ACOUSTIVIBE sound insulators and metal furrings soundproof drywall ceilings in a unique and innovative way. Rather than attach the metal…
View Product
ALSAN® TRAFIK RS 787 CF
ALSAN TRAFIK RS 787 CF (Color Finish) is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN TRAFIK RS 787…
View ProductRelated Projects
World Vision – Federal Way, Washington
When looking for a quality roof system that would have minimal impact on everyday operations and overall budget, Wayne’s Roofing, Inc. selected SOPREMA’s SOPRASMART® product line. Not only was SOPRASMART® an affordable product, it also offered time and labor savings.
ANB Bank – Denver, Colorado
When the Denver ANB Bank was to go through a remodel, SOPREMA’s COLPHENE® LM BARR product was selected to waterproof the building. With a tight deadline and existing concrete preparation to take into consideration, COLPHENE LM BARR was the perfect solution due to its excellent performance qualities. With COLPHENE LM BARR’s STPE moisture cure technology, the new and improved ANB Bank will have a continuous waterproofing layer that can withstand extreme cold and high temperatures without cracking or softening for many years to come.