SOPRAFIX® BASE 613 SKU: 00423
SOPRAFIX® BASE 613 SKU: 00423
SOPRAFIX BASE 613 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 613 is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Mechanically Attached
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRAFIX BASE 613 onto the roof surface and allow to relax. Place SOPRAFIX BASE 613 in desired position. SOPRAFIX BASE 613 is mechanically fastened through the 5-inch side laps using the appropriate fastener. Subsequent approved inter-ply or cap ply membranes are applied to SOPRAFIX BASE 613 via heat welding.
Testing & Approvals
Related Products
COLPHENE® H-EV
COLPHENE® H-EV (environmentally friendly) is a hot-applied, rubberized asphalt waterproofing membrane for use in approved waterproofing assemblies.
View Product
SOPRAFIX® MBBR BATTEN BAR
SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with…
View Product
ALSAN TRAFIK RS 730 Field
ALSAN TRAFIK RS 730 FIELD is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN TRAFIK RS 730 FIELD resin…
View ProductRelated Projects
Cleveland Clinic – Cleveland, Ohio
Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.
Fashion Institute of Technology – New York City, New York
The Fashion Institute of Technology needed a new roof on Building E in the dead of winter. In addition they wanted a low odor, green solution. The answer, SOPREMA’s advanced ALSAN RS 260 LO PMA liquid membrane system.