ELASTOPHENE® HR SANDED 2.2 SKU: 00209
ELASTOPHENE® HR SANDED 2.2 SKU: 00209
ELASTOPHENE HR Sanded 2.2 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE HR Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Scrim
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE HR Sanded 2.2 onto the roof surface and allow to relax. Place ELASTOPHENE HR Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. ELASTOPHENE HR Sanded 2.2 is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE HR Sanded 2.2 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® T-JOINT PATCHES
SENTINEL T-JOINT PATCHES are made using 60 mil, reinforced SENTINEL P150 PVC membrane cut into a perfect 4.5 in-diameter circle….
View ProductALSAN® TRAFIK RS 733 PART A
ALSAN TRAFIK RS 733 Part A is a high-performance rapid-setting, polymethyl methacrylate (PMMA) resin. ALSAN TRAFIK RS 733 PART A…
View ProductANTIROCK® EMULSION PRIMER
ANTIROCK Emulsion Primer is a bituminous emulsion (a stabilized blend of bitumen and water without solvent). It is used to…
View ProductRelated Projects
Deer Meadow Primary School – Greencastle, Indiana
Deer Meadow Primary School is a public elementary school located in Greencastle, IN. Designed with highly visible roofing architectural appearance on all sides of the building, a roofing membrane with color matching aesthetics and long-term performance was needed. SOPREMA®’s SENTINEL® Copper Art P150 HFB PVC was a perfect fit.