ELASTOPHENE® HR SANDED 3.0 SKU: 00213
ELASTOPHENE® HR SANDED 3.0 SKU: 00213
ELASTOPHENE HR Sanded 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE HR Sanded 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Scrim
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 120 mils (3.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE HR Sanded 3.0 onto the roof surface and allow to relax. Place ELASTOPHENE HR Sanded 3.0 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. ELASTOPHENE HR Sanded 3.0 is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE HR Sanded 3.0 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRANATURE® MRM 5
SOPRANATURE MRM 5 is a moisture retention mat made from recycled polyester, designed to provide water and nutrient storage for…
View Product
Bitutak Cold Mineral
BITUTAK® Cold Mineral is a 4.0 mm (157 mils) APP (Atactic Polypropylene) modified bitumen roofing membrane for approved multi-ply membrane…
View Product
SOPRASEAL® Xpress G
SOPRASEAL Xpress G is an exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to…
View ProductRelated Projects
World Vision – Federal Way, Washington
When looking for a quality roof system that would have minimal impact on everyday operations and overall budget, Wayne’s Roofing, Inc. selected SOPREMA’s SOPRASMART® product line. Not only was SOPRASMART® an affordable product, it also offered time and labor savings.
Walter Reed Community Center – Arlington, Virginia
From the beginning, the architect designing the Walter Reed Community Center was asked to include a vegetative roof within the blueprints. The goal was a LEED certified Silver level building.