ELASTOPHENE® FLAM HR 3.0 SKU: 00252
ELASTOPHENE® FLAM HR 3.0 SKU: 00252
ELASTOPHENE® Flam HR 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam HR 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Installation Method Heat Welded
- Reinforcement Glass Scrim
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE Flam HR 3.0 onto the roof surface and allow to relax. Position ELASTOPHENE Flam HR 3.0 in desired position and back roll the product. ELASTOPHENE Flam HR 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam HR 3.0 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRADRAIN™ 104
SOPRADRAIN 104 is a versatile workhorse that delivers first-rate protection for waterproofing systems. Faced with a woven fabric layer, this…
View ProductSOPRAWAY NG2
SOPRAWAY NG2 is an anti-fracture acoustic membrane intended for ceramic tiles floors. The SOPRAWAY NG2 membrane allows the direct application…
View ProductSENTINEL® KEE BOOT FLASHINGS
SENTINEL KEE BOOT FLASHINGS are factory fabricated, cone-shaped boots made using reinforced SENTINEL KEE P150 membrane. Available for traditional or…
View ProductRelated Projects
Asian Health & Services Center – Portland, Oregon
Leicester Fire Department – Leicester, Massachusetts
When building a new fire station, the department needed a wall assembly that would ensure a water-tight building. To complete this project, SOPREMA wall systems were selected. With the use of SOPRASEAL® LM 203, SOPRASEAL Stick VP and SOPRASEAL Stick 1100T, the department does not have to worry about moisture infiltration in their brand new facility.