ELASTOPHENE® FLAM HS SKU: 00399
ELASTOPHENE® FLAM HS SKU: 00399
ELASTOPHENE® Flam HS (high strength) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam HS is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable composite polyester/glass fiber reinforcement. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6162
- Component Base
- Installation Method Heat Welded
- Reinforcement Composite
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE Flam HS onto the roof surface and allow to relax. Position ELASTOPHENE Flam HS in desired position and back roll the product. ELASTOPHENE Flam HS is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam HS via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Related Products
SOPRALENE® 250 FR+ GR
SOPRALENE 250 FR+ GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View Product
SOPRALAP SP
SOPRALAP SP (sanded, polyolefin) is an SBS-modified bitumen cover strip for use with SOPRASMART Laminated Board products. SOPRALAP SP is…
View Product
SOPRANATURE® INSPECTION CHAMBER
The SOPRANATURE INSPECTION CHAMBER is designed to fit over roof drains and protects drains from debris and particles that can…
View ProductRelated Projects
Flatiron Building – New York, New York
The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.
Beijing Zoo Road Bridge – Beijing, China
The Zoo Road viaduct bridge crosses Beijing Zoo, as a part of the infrastructure for Beijing 2008 Olympic Games. The waterproofing area is about 27,000 ft2, and completed October 2007. The waterproofing layer was installed by SOPREMA Macaden Automatic Installation System with 200 meter long SBS modified bitumen membrane—ANTIROCK.