ELASTOPHENE® SP 3.0 SKU: 00494
ELASTOPHENE® SP 3.0 SKU: 00494
ELASTOPHENE SP 3.0 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burnoff film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE SP 3.0 onto the roof surface and allow to relax. Position ELASTOPHENE SP 3.0 in desired position and back roll the product. ELASTOPHENE SP 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE SP 3.0 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
DUOTACK® SPF ADHESIVE
DUOTACK SPF ADHESIVE is a low-pressure, two-component spray polyurethane foam adhesive formulated for adhering SENTINEL HFB (Heavy Fleece-Backed) PVC membranes,…
View Product
ALSAN® COATING SIL 402
ALSAN COATING SIL 402 is a high solids, single component, silicone roof coating and protective barrier for various low-slope…
View Product
SOPRASEAL® LM 204 VP
SOPRASEAL LM 204 VP is a one-component, 98% solids content, liquid applied, vapor-permeable air barrier membrane used in wall construction….
View ProductRelated Projects
Second Ward Gymnasium – Charlotte, North Carolina
Second Ward High School is a historic school in Charlotte, North Carolina that opened in 1923. The school was closed in 1969 and eventually demolished,with the exception of the gymnasium. When renovating the building into a recreation center, SOPREMA products were used to seal and protect the wall systems.
Airport High School – West Columbia, South Carolina
Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.