ELASTOPHENE® FLAM FR+ GR SKU: 03764
ELASTOPHENE® FLAM FR+ GR SKU: 03764
ELASTOPHENE® Flam FR+ GR (fire retardant, granules) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Component Cap
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 130 mils (3.3 mm)
- Thickness (nominal) 138 mils (3.5 mm)
- Topside Granules
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE Flam FR+ GR onto the roof surface and allow to relax. Position ELASTOPHENE Flam FR+ GR in desired position and back roll the product. ELASTOPHENE Flam FR+ GR is then heat welded to approved substrates. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRABASE™ S
SOPRABASE S is an SBS modified bitumen-coated polyester-reinforced base sheet for use in multi-ply membrane assemblies. SOPRABASE S may be…
View Product
SOPRA-XPS 25 CW
SOPRA-XPS 25CW are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 25CW is mainly used as thermal…
View Product
ALSAN® TRAFIK RS 733 PART A
ALSAN TRAFIK RS 733 Part A is a high-performance rapid-setting, polymethyl methacrylate (PMMA) resin. ALSAN TRAFIK RS 733 PART A…
View ProductRelated Projects
Lancaster Material Distribution Center – Lancaster, Texas
In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.
205 AVENUE C – New York, New York
SOPRASMART® laminated boards combine the roof membrane and coverboard into one installation layer, saving the installer time and labor. This patented product is the first and only in its category, bringing material savings to the equation as well.