COLVENT™ TG SKU: 00388
COLVENT™ TG SKU: 00388
COLVENT TG (torch grade) is a SBS-modified bitumen membrane approved for use in roofing assemblies. COLVENT TG is reinforced with a glass fiber mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll COLVENT TG onto the roof surface and allow to relax. Place COLVENT TG in desired position and back roll the product. COLVENT TG is then heat welded to approved substrates. NOTE: Take care not to overheat the sanded underside to maintain open vent channels between the adhered bitumen ribbons. Fully adhere all side and end laps via heat-welding.
Testing & Approvals
Related Products
2-1 SOPRASMART BOARD
2-1 SOPRASMART BOARD is a high-performance factory laminated panel combining an SBS-modified bitumen base membrane and SOPRABOARD an asphaltic roof…
View Product
ELASTOPHENE® PS 3.0
ELASTOPHENE® PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS…
View Product
SOPRAFIX® MBB BATTEN BAR
SOPRAFIX® MBB (Metal Batten Bar) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with 3″ o.c. pre-punched…
View ProductRelated Projects
Perry Monument – Put-in-Bay, Ohio
At 352-feet, it is among the tallest monuments. The world’s most massive Doric column was constructed by a multi-state commission from 1912 to 1915 “to inculcate the lessons of international peace by arbitration and disarmament”.