COLVENT™ FLAM 180 FR GR SKU: 01986
COLVENT™ FLAM 180 FR GR SKU: 01986
COLVENT Flam 180 FR GR is an SBS-modified bitumen vented membrane used as a recover on existing roofing membranes. COLVENT Flam 180 FR GR is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturatedand coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6164
- Component Cap
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Granules
- Underside Burn Off Film
Installation
Prime the existing roof surface substrate using ELASTOCOL 500 primer, refer to primer product data sheet for application instructions. Unroll the sheet onto the roof surface and allow to relax prior to installation. During application, as COLVENT Flam 180 FR GR is unrolled, apply heat from an approved roof torch high on the roll as necessary to remove the burnoff film and melt the ribbons of bitumen. Ensure the sanded underside is not overheated in order to maintain open vent channels between the adhered bitumen ribbons. Fully-adhere all side-laps watertight.
Testing & Approvals
Related Products
ALSAN Trafik PU 215
ALSAN Trafik PU 215 is a multi-component, water catalyzed, polyurethane elastomeric base membrane. This base coat provides excellent adhesion to…
View ProductSOPRALENE® 250 FR GR HC
SOPRALENE 250 FR GR HC (fire retardant, granulated, hybrid cap) is an SBS modified bitumen cap ply for use in…
View ProductSOPRA-XPS 100
SOPRA-XPS 100 are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. It is mainly used for SOPREMA foundation…
View ProductRelated Projects
Riviere Saint-Etienne Bridge – Saint Denis, France
City: Saint Denis
Country: Reunion Island (Bourbon Island) - France
Product used: ANTIROCK® P quickly implemented on asphalt with the use of 2 new generation of Mini-Macaden® - Upstands : Flashing® TP
Northwest Wine Academy – Seattle, Washington
In 2017, the Northwest Wine Academy was in need of a new retrofit roofing project. The retrofit was to take place over the existing metal roof covering 10,735 square feet. To complete the project, SOPREMA’s SENTINEL® P150 HFB Copper Art was selected as the main roofing membrane.