ALSAN® RS 230 FIELD SKU: L-RS020S
ALSAN® RS 230 FIELD SKU: L-RS020S
ALSAN RS 230 FIELD is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 FIELD resin is combined with ALSAN RS Fleece to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FIELD is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FIELD to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® RS Cleaner
ALSAN RS CLEANER is a solvent-based solution specially formulated to clean and reactivate fully cured, in-place ALSAN RS membranes. ALSAN…
View Product
LASTOBOND® SHIELD HT
LASTOBOND SHIELD HT (high temperature) is a SBS-modified bitumen underlayment for use in approved steep-slope assemblies. LASTOBOND SHIELD HT is…
View Product
ELASTOPHENE® PS 3.0
ELASTOPHENE® PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS…
View ProductRelated Projects
Deer Meadow Primary School – Greencastle, Indiana
Deer Meadow Primary School is a public elementary school located in Greencastle, IN. Designed with highly visible roofing architectural appearance on all sides of the building, a roofing membrane with color matching aesthetics and long-term performance was needed. SOPREMA®’s SENTINEL® Copper Art P150 HFB PVC was a perfect fit.
Bellevue Hospital Center – New York, New York
Bellevue, the nations oldest medical center, is protected by SOPREMA’s ALSAN RS 260 LO PMA liquid membrane technology. In the dead of winter, with strict project parameters, SOPREMA’s ALSAN RS created an impenetrable liquid waterproofing membrane guaranteed to be waterproof for 20 years with a life expectancy of 25 to 30 years.