ALSAN® COATING AC 401 SKU: L-AACW5
ALSAN® COATING AC 401 SKU: L-AACW5
ALSAN COATING AC 401 is a high quality, single component, water-based, acrylic elastomeric roof coating and protective barrier for various low-slope roof surfaces and substrates. Upon cure, ALSAN COATING AC 401 forms a durable, weatherproof coating that is highly resistant to degradation from UV and natural weathering.
Product Properties
- Material Resin
- Technology Acrylic
Installation
Thoroughly mix the coating before application. All surfaces must be dry and free of dirt, debris, algae, mildew, oil, talc, loose granules or any other foreign matter that may prohibit adhesion. ALSAN COATING AC 401 can be applied using a brush, roller or airless spray equipment. Apply at a minimum rate of 1.0 gallons per 100 square feet for a minimum dry film thickness (DFT) of 9 mils.
Please refer to the SOPREMA Roof Coatings Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® COATING AC 401 FLASHING
ALSAN COATING AC 401 FLASHING is a high quality, fiber-fortified, water-based, acrylic elastomeric roof mastic. Upon cure, ALSAN COATING AC…
View ProductALSAN® COATING ASPHALT BLEED BLOCKING PRIMER
ALSAN COATING ASPHALT BLEED BLOCKING PRIMER is a water-based, acrylic primer that is VOC compliant, single component and used to…
View ProductALSAN® COATING BUTYL FLEECE TAPE
ALSAN COATING BUTYL FLEECE TAPE contains a butyl rubber compound with a polyester fleece face used where required or recommended…
View ProductRelated Projects
University of Oregon Residence Hall – Eugene, Oregon
With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.
Mall of Georgia – Buford, GA
The expansive Mall of Georgia is the largest mall in Georgia and one of the largest in all of the United States, consisting of more than two hundred stores on three levels.