SOPRANATURE® DRAIN BOX SKU: W856
SOPRANATURE® DRAIN BOX SKU: W856
Manufactured from recycled acrylonitrile-butadiene-styrene (ABS) with narrow slots on the sidewalls and small holes on the top cover, SOPRANATURE DRAIN BOX blocks debris while allowing continuous water flow to roof drains. A 12-inch opening provides unobstructed drain access, and wide bottom extensions ensure the drain box will not float during times of high water intake. SOPRANATURE DRAIN BOX comes in a standard 4 in height that can extend up to 32 in with extension kits.
Installation
Interlock sidewall panels at each corner and stagger horizontal joints. Connect sidewalls to the bottom plate and top cover. Assemblies measuring over 16 in high must be screwed together. Refer to the diagram shown on the right.
Related Products
SBL HP Flashing Cement
SBL HP (High Performance) Flashing Cement is a trowel grade elastic, rubberized roof flashing cement. It is composed of a…
View ProductCOLPHENE® LM BARR
COLPHENE® LM BARR is a single component with 98% solids content and a liquid-applied, moisture-curing elastomeric waterproofing membrane.
View ProductSOPRAFLASH™ R
SOPRAFLASH R is a lightweight, thermally bonded, spunlaid polyester/nylon composite mat. SOPRAFLASH R is a reinforcing non-woven mesh used to…
View ProductRelated Projects
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.
Garibaldi Square Condos – Chicago, Illinois
This award winning project is the direct result of the building owner’s resistance to using hot asphalt and torches on the roof. SOPREMA’s mechanically attached, self-adhered system was used to accommodate the building owner’s desires.