SOPRABARRIER 20/30/40 PE SKU: W3062, W3063
SOPRABARRIER 20/30/40 PE SKU: W3062, W3063
SOPRABARRIER is composed of a virgin blended linear-low-density polyethylene (LLDPE). SOPRABARRIER is designed to protect underlying roofing and waterproofing assemblies from root penetration. SOPRABARRIER offers high puncture and tear resistance and is available in three thicknesses, 20, 30 and 40 mil.
Product Properties
- Type Green
Installation
Prior to installation, unroll SOPRABARRIER and place into the designated position. Overlap with the adjacent sheets by approximately 24 inches, and apply SOPRASEAL STICK FLASHPRO to the upper edge of the overlay.
Related Products
SOPRAFLASH™ UN
SOPRAFLASH™ UN is an uncured neoprene flashing material. SOPRAFLASH UN is used in conjunction with COLPHENE® H and COLPHENE H-EV…
View Product
COLPHENE® LM BARR
COLPHENE® LM BARR is a single component with 98% solids content and a liquid-applied, moisture-curing elastomeric waterproofing membrane.
View Product
ALSAN® COATING SIL 402 FLASHING
ALSAN COATING SIL 402 FLASHING is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare…
View ProductRelated Projects
Fayetteville Area System of Transit Multimodal Project – Fayetteville, North Carolina
The original design selected for the center left the project over budget, so the contractor and architect had to go back to the drawing board. After researching additional options, both Baker Roofing and Gantt Huberman Architects felt very comfortable with SOPREMA’s proven history and the ability to meet the Buy American requirement, so they selected the SENTINEL® line for the project.
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.