ELASTOCOL STICK H2O is a water-based polymer emulsion primer approved for use in roofing, walls and waterproofing assemblies. ELASTOCOL STICK H2O is engineered to increase adhesion of self-adhered SBS membranes on approved substrates. ELASTOCOL STICK H2O is recommended when the use of solvent-based primers are not advised.

Installation

Thoroughly mix ELASTOCOL STICK H2O prior to application. ELASTOCOL STICK H2O is applied to the approved area via brush or roller.

Approximate coverage rates (non-porous substrates):
• Roofing: 140 to 330 square feet per gallon (0.3 to 0.7 gallons per 100 square feet)
• Walls and foundations: 200 square feet per gallon

Surface profile and porosity of the substrate will affect the coverage rates.

Ensure primer is tacky to-the-touch, but not wet before installing overlying membrane. Primer should not transfer to the fingertips when touched.