BITUTAK® SA BASE SKU: 00866
BITUTAK® SA BASE SKU: 00866
BITUTAK SA BASE is an SBS-modified bitumen base ply for use in approved non-system warranty applications. BITUTAK SA BASE is a self-adhering waterproofing membrane composed of a tough polyester reinforcement that is saturated and coated on both sides with bituminous asphalt. The topside is covered with fine mineral particles for enhanced traction during application, and the self-adhesive underside is protected with a siliconized release film that is easily removed before application.
Product Properties
- Installation Method Self-Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 47 mils (1.20 mm)
- Thickness (nominal) 53 mils (1.35 mm)
- Topside Sanded
- Underside Release Film
Installation
Allow the membrane to relax prior to installation. Place the membrane in the desired position. Remove the protective release film from the underside of the sheet. Roll the membrane into place with a hand roller to ensure proper adhesion. Side laps must be a minimum of 3 inches (76 mm) and end laps a minimum of 6 inches (152 mm).
Related Products
ALSAN® RS TEXTURED COATING
ALSAN RS Textured Coating is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) liquid resin with integrally mixed aggregate. ALSAN RS…
View ProductSOPRAFIX® MBBR BATTEN BAR
SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with…
View ProductACOUSTIDRAIN
ACOUSTIDRAIN is a revolutionary acoustic product that eliminates the noise caused by water flowing in indoor sanitary drainage or fall…
View ProductRelated Projects
U.S. Treasury Building – Washington DC
The Treasury Building is the oldest departmental building in Washington and has had a great impact on the design of other governmental buildings. At the time of its completion, it was one of the largest office buildings in the world.
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.