SOPRASEAL® STICK VP SKU: 21501
SOPRASEAL® STICK VP SKU: 21501
SOPRASEAL STICK VP is a lightweight 24-mil self-adhered, vapor-permeable, water-resistive air barrier used in wall construction. SOPRASEAL STICK VP is composed of a tough tri-laminate composite facer coated with a high-tack adhesive and protected with a silicone release film.
SOPRASEAL STICK VP is installed without the use of a primer as an air and vapor mitigating barrier on vertical masonry and concrete walls, as well as exterior gypsum wall board, metal, OSB and exterior grade plywood sheathing.
Product Properties
- Air Permeability ASTM ASTM E2178
- Air Permeability ASTM ASTM E2357
- Thickness 24 mils (0.6 mm)
- Topside Trilaminated Polypropylene
- Vapor Permability ASTM ASTM E96 (Procedure B)
Installation
1. Apply SOPRASEAL STICK VP vertically to the wall by peeling back about 12 in of the release film from the back side of the roll and adhere the sheet to the substrate making sure it is well aligned.
2. Continue to gradually peel off the remaining release film while hand pressing the sheet to the wall making sure to adhere it completely and avoiding air pockets and wrinkles.
3. After each sheet is hand installed, use a hard rubber hand roller to apply pressure over the entire surface to ensure uniform and intimate contact with the substrate.
4. Overlapping of sheets in the field of the wall that run horizontally should be a minimum 3 in and overlaps that run vertically should be a minimum 3 in. Laps at window openings and other detailed areas with flashing products should be a minimum 3 in.
Testing & Approvals
Related Products
SOPRAFLOR AU
SOPRANATURE SOPRAFLOR AU is optimized for fertility, workability and longevity. The medium of choice for rooftop farms for the production…
View Product
SOPRANATURE® INSPECTION CHAMBER
The SOPRANATURE INSPECTION CHAMBER is designed to fit over roof drains and protects drains from debris and particles that can…
View Product
SOPRANATURE® MRM 5
SOPRANATURE MRM 5 is a moisture retention mat made from recycled polyester, designed to provide water and nutrient storage for…
View ProductRelated Projects
Deer Meadow Primary School – Greencastle, Indiana
Deer Meadow Primary School is a public elementary school located in Greencastle, IN. Designed with highly visible roofing architectural appearance on all sides of the building, a roofing membrane with color matching aesthetics and long-term performance was needed. SOPREMA®’s SENTINEL® Copper Art P150 HFB PVC was a perfect fit.
Parkland Hospital – Dallas, Texas
The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.