SOPRASEAL® Stick 1100T SKU: 14046
SOPRASEAL® Stick 1100T SKU: 14046
SOPRASEAL Stick 1100T is a self-adhered waterproofing membrane. SOPRASEAL Stick 1100T is composed of a proprietary high quality elastomeric styrene- butadiene-styrene (SBS) polymer-modified bitumen blend and a woven polyethylene composite facer. SOPRASEAL Stick 1100T is used as a self-adhered air, vapor and rain barrier on vertical walls of masonry, concrete or gypsum sheathing designed to be used as a base for exterior insulation and finish systems (EIFS). SOPRASEAL Stick 1100T may also be used as a transition membrane at doors, windows, penetrations, etc. The underside consists of a self-adhesive bitumen layer protected by a release paper.
Product Properties
- Air Permeability ASTM ASTM E2178
- Air Permeability ASTM ASTM E2357
- Thickness 40 mils (1.0 mm)
- Topside Polyethylene Film
- Vapor Permability ASTM ASTM E96 (Procedure B)
Installation
Substrates must be clean and dry, primed with SOPRASEAL Stick Primer, ELASTOCOL Stick Zero or ELASTOCOL Stick H2O to ensure better adhesion. Apply by peeling back the release film on the underside of the sheet and applywith hand pressure. Once the sheet is in place, roll entire sheet with a weighted roller.
Application temperatures:
Winter grade: 14 to 50°F (-10 to 10°C)
Summer grade: 50 to 122°F (10 to 50°C)
Service temperatures:
Winter grade: -49 to 194°F (-45 to 90°C)
Summer grade: -49 to 194°F (-45 to 90°C)
UV exposure up to 90 days
Testing & Approvals
Related Products
SOPRASLOPE™
SOPRASLOPE is a cementitious sloping material for use in approved multi-ply membrane and flashing assemblies. SOPRASLOPE is composed of an…
View Product
SOPRAJOINT®
SOPRAJOINT® is an SBS-modified bitumen expansion joint membrane for use in approved multi-ply membrane and flashing assemblies. SOPRAJOINT is composed…
View Product
ELASTOPHENE® STICK FR GR
ELASTOPHENE® Stick FR GR (fire retardant, granules) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View ProductRelated Projects
Lancaster Material Distribution Center – Lancaster, Texas
In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.
First Market Tower – San Francisco, California
Multiple SOPREMA systems were installed on this 23,500 square foot project. From the COLPHENE H hot applied, rubberized asphalt system to the use of ALSAN RS for the complex details, there was a solution for every aspect of this project.