COLPHENE® 180 PS SKU: 01217
COLPHENE® 180 PS SKU: 01217
COLPHENE 180 PS (polyolefin, sanded) is a SBS-modified bitumen membrane approved for use in waterproofing assemblies. COLPHENE 180 PS is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM D6164, Type I, Grade S
- Reinforcement Non-Woven Polyester
- Thickness 87 mils (2.2 mm)
- Topside Polyolefin Burn-Off Film
- Underside Sanded
Installation
Prior to installation, unroll COLPHENE 180 PS onto the deck and allow to relax. Place COLPHENE 180 PS in desired position and back roll the product. Apply approved cold adhesive following the manufacturer specifications. COLPHENE 180 PS is then placed into the cold adhesive or and rolled with a weighted roller to ensure adhesion.
Testing & Approvals
Related Products
SOPRA-ISO® PLUS
SOPRA-ISO PLUS is a rigid polyisocyanurate thermal insulation board used in approved multi-ply membrane assemblies. SOPRA-ISO PLUS comprises a closed-cell…
View Product
ACOUSTIDRAIN
ACOUSTIDRAIN is a revolutionary acoustic product that eliminates the noise caused by water flowing in indoor sanitary drainage or fall…
View Product
SENTINEL® KEE P150 HFB
SENTINEL KEE P150 HFB is a high-performance, fleece-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope…
View ProductRelated Projects
Fashion Institute of Technology – New York City, New York
The Fashion Institute of Technology needed a new roof on Building E in the dead of winter. In addition they wanted a low odor, green solution. The answer, SOPREMA’s advanced ALSAN RS 260 LO PMA liquid membrane system.
CSU Maritime Academy – Vallejo, California
California Maritime Academy chose SOPREMA®’s SOPRALENE® SG cap sheet because it meets Title 24 cool roof standards. The California Energy Commission’s Title 24 Energy Efficiency Standards for Residential and Nonresidential Buildings establishes prescriptive requirements for cool roof materials in new construction or major re-roofing projects.