COLPHENE® BSW H SKU: D00287
COLPHENE® BSW H SKU: D00287
COLPHENE BSW H is an SBS-modified bitumen waterproofing membrane for use in approved blind side/under slab waterproofing assemblies. COLPHENE BSW H is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. COLPHENE BSW H is designed for horizontal blind side/under slab waterproofing applications. The topside is surfaced with fine mineral aggregate and the underside is surfaced with polyolefin burn-off film.
Product Properties
- Installation Method Loose laid
Installation
Prior to installation, unroll COLPHENE BSW H and allow to relax. Loose lay COLPHENE BSW H in desired position on approved prepared substrate. Once the membrane is in the desired location remove the release film on the DUO SELVEDGE side lap. Once the self-adhered portion of the lap is adhered, a heat welding device is used to seal the lap. Refer to the SOPREMA SBS Waterproofing Manual for additional application guidelines.
Related Products
ALSAN TRAFIK PU 411
ALSAN Trafik PU 411 is a single-component, aliphatic urethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA polyurethane system…
View Product
SOPRASEAL® STICK VP
SOPRASEAL STICK VP is a lightweight 24-mil self-adhered, vapor-permeable, water-resistive air barrier used in wall construction. SOPRASEAL STICK VP is…
View Product
SENTINEL® BOOT FLASHINGS
SENTINEL BOOT FLASHINGS are factory fabricated, cone-shaped boots made using reinforced SENTINEL P150 PVC membrane. Available for traditional or split-pipe…
View ProductRelated Projects
College Street Culvert – Wadsworth, Ohio
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.