ALSAN TRAFIK PU 410 SKU: 00513098
ALSAN TRAFIK PU 410 SKU: 00513098
ALSAN Trafik PU 410 is a single-component, aromatic urethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA polyurethane system base coats for application of SOPREMA polyurethane coating system. ALSAN Trafik PU 410 is recommended for light-duty pedestrian and vehicular applications that are not directly exposed to sunlight.
Product Properties
- Material Polyurethane
- Technology Polyurethane
Installation
ALSAN Trafik PU 410 is applied via notched squeegee, roller or notched trowel. Prior to application, refer to published specifications and approved details for complete application instructions. ALSAN Trafik PU 410 should be thoroughly mixed prior to application to ensure a consistent homogenous material from top to bottom. ALSAN Trafik PU 410 should be mixed using a mechanical mixer at slow speed for 2-3 minutes.
Related Products
COLPHENE® 250 FR GR
COLPHENE® 250 FR GR (fire retardant, granulated) is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen and reinforced with a tough, dimensionally stable nonwoven polyester mat. The topside is surfaced with ceramic-coated granules, and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
View Product
ALSAN® RS 276 PRIMER
ALSAN RS 276 PRIMER is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 276 PRIMER is utilized to…
View Product
SOPRANATURE® MRB 30
SOPRANATURE MRB 30 is a moisture retention board with drainage properties made from 100% recycled polyester. SOPRANATURE MRB 30 is…
View ProductRelated Projects
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.
Parkland Hospital – Dallas, Texas
The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.