SOPRA-XPS 25 CW
SOPRA-XPS 25 CW
SOPRA-XPS 25CW are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 25CW is mainly used as thermal insulation for above grade SOPREMA wall systems. SOPRA-XPS 25CW insulation boards are scored every 16 in (400 mm) and 24 in (600 mm) so they can easily be cut when they need to fit perfectly between wall ties.
Product Properties
- Material Extruded Polystyrene
- Use Insulation
Installation
Place SOPRA-XPS 25CW in desired position. Butt edges and stagger joints of adjacent boards. Secure boards to substrate using mechanical fasteners.
Refer to SOPREMA’s published technical literature for additional details and application requirements.
Related Products
INSONO AF3-47
INSONO AF3-47 is composed of self-adhesive elastomeric bitumen with an exposed non-woven polyester reinforcement. The underside is surfaced with a…
View ProductSOPRASEAL STICK FLASHPRO AB
SOPRASEAL STICK FLASHPRO AB is a 35 mil thick air and vapor barrier flashing membrane, made with a UV exposable…
View ProductTRI-FIXX™ FASTENING SYSTEM
The TriFixx™ Fastening System is a plate/nail combination that is utilized for mechanically attaching SOPREMA™ membranes to lightweight insulating concrete…
View ProductRelated Projects
Flatiron Building – New York, New York
The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.