SOPRALENE® 180 SP 3.0 SKU: 00622
SOPRALENE® 180 SP 3.0 SKU: 00622
SOPRALENE 180 SP 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 120 mils (3.0 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE 180 SP 3.0 onto the roof surface and allow to relax. Position SOPRALENE 180 SP 3.0 in desired position and back roll the product. SOPRALENE 180 SP 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 SP 3.0 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
LASTOBOND® SHIELD HT
LASTOBOND SHIELD HT (high temperature) is a SBS-modified bitumen underlayment for use in approved steep-slope assemblies. LASTOBOND SHIELD HT is…
View Product
SOPRALENE® 180 PS 3.0
SOPRALENE 180 PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE…
View Product
COLPHENE® LM BARR Spray
COLPHENE LM BARR Spray is a single component, 95% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE LM…
View ProductRelated Projects
Cleveland Museum of Art – Cleveland, Ohio
This $350 million project was the largest cultural project in Ohio’s history. SOPREMA’s SOPRALENE® Flam 180 polymer modified bitumen two-ply system was installed. SOPREMA was the ideal manufacturer for the project as they were able to provide a variety of quality products to accommodate the projects’
needs with a single source warranty.
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.