SOPRALENE® FLAM 180 SKU: 00410
SOPRALENE® FLAM 180 SKU: 00410
SOPRALENE® Flam 180 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam 180 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE Flam 180 onto the roof surface and allow to relax. Position SOPRALENE Flam 180 in desired position and back roll the product. SOPRALENE Flam 180 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Flam 180 via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® UNIVERSAL SEALANT
SENTINEL UNIVERSAL SEALANT is a moisture-cured, polyether, elastomeric sealant for use in approved SENTINEL PVC membrane and flashing assemblies. SENTINEL…
View Product
ULTRA-STICK® NAIL BASE
ULTRA-STICK Nail Base is an SBS-modified bitumen nail base sheet for use in approved multi-ply membrane assemblies over nailable deck….
View Product
SENTINEL® BOOT FLASHINGS
SENTINEL BOOT FLASHINGS are factory fabricated, cone-shaped boots made using reinforced SENTINEL P150 PVC membrane. Available for traditional or split-pipe…
View ProductRelated Projects
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.
Bellevue Hospital Center – New York, New York
Bellevue, the nations oldest medical center, is protected by SOPREMA’s ALSAN RS 260 LO PMA liquid membrane technology. In the dead of winter, with strict project parameters, SOPREMA’s ALSAN RS created an impenetrable liquid waterproofing membrane guaranteed to be waterproof for 20 years with a life expectancy of 25 to 30 years.