SOPRA-XPS 35
SOPRA-XPS 35
SOPRA-XPS 35 is a rigid thermal insulation board made of extruded polystyrene with shiplap or square edges on all four sides. It is composed of closed cell foam. It is mainly used as a thermal insulation for SOPREMA protected-membrane roofing systems (inverted roofs). Compliant with ASTM C578-14, Type IV.
Product Properties
- Material Extruded Polystyrene
- Use Insulation
Installation
LOOSE LAID
• Insulation boards are laid flat on the ground for applications under concrete slab
• When installing multiple layers of SOPRA-XPS, all joint should be staggered between layers
• When another layer of SOPRA- XPS 35 insulation is required, it should be installed with staggered joints without being adhered to the first layer
Related Products
ELASTOPHENE® HR FR GR
ELASTOPHENE HR FR GR (high resistance, fire retardant, granulated) is an SBSmodified bitumen cap ply for use in approved multi-ply…
View Product
INSONO AF3-47
INSONO AF3-47 is composed of self-adhesive elastomeric bitumen with an exposed non-woven polyester reinforcement. The underside is surfaced with a…
View Product
SENTINEL® PREFABRICATED INSIDE CORNERS
SENTINEL® Inside and Outside Corners are manufactured from fiberglass reinforced 60 mil PVC membrane and intended to flash 90 degree…
View ProductRelated Projects
Carrick High School – Pittsburgh, Pennsylvania
In 2017, Carrick High School’s roof was ready to be replaced. It was decided the best option was to tear off the previous roof and start fresh. Due to the relationship the architect, HHSDR Architects / Engineers, has with SOPREMA, the system that was selected to replace the previous roof included: SOPRA-ISO®, SOPRABOARD®, SOPRALENE® Flam Stick and SOPRALENE FLAM 180 FR GR.
Lancaster Material Distribution Center – Lancaster, Texas
In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.