ELASTOPHENE® SP 3.0 SKU: 00494
ELASTOPHENE® SP 3.0 SKU: 00494
ELASTOPHENE SP 3.0 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burnoff film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE SP 3.0 onto the roof surface and allow to relax. Position ELASTOPHENE SP 3.0 in desired position and back roll the product. ELASTOPHENE SP 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE SP 3.0 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® PREFABRICATED CORNERS
SENTINEL PREFABRICATED CORNERS are manufactured from fiberglass reinforced 60 mil PVC membrane and intended to flash 90 degree outside and…
View ProductSOPRANATURE® INSPECTION CHAMBER
The SOPRANATURE INSPECTION CHAMBER is designed to fit over roof drains and protects drains from debris and particles that can…
View ProductCOLPHENE® 180 PS
COLPHENE® 180 PS (polyolefin, sanded) is an SBS-modified bitumen base ply for use in approved multi-ply membrane waterproofing assemblies.
View ProductRelated Projects
Asian Health & Services Center – Portland, Oregon
Chinese Hospital Outpatient Center – San Francisco, California
SOPREMA’s SENTINEL line was the product of choice for this project because of its proven quality, competitive pricing and superior technical support. Platinum Roofing, the contractor for the project, utilized SENTINEL G150, SENTINEL H2O Bonding Adhesive, SENTINEL VCM, and SENTINEL Prefabricated Corners and Pipe Flashings to complete the roof.