COLPHENE® BSW V SKU: D00282
COLPHENE® BSW V SKU: D00282
COLPHENE® BSW V is an SBS-modified bitumen, self-adhered waterproofing membrane for use in approved blind side waterproofing assemblies. COLPHENE BSW V is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement. COLPHENE BSW V is designed specifically for vertical pre applied/blind side waterproofing applications. The topside is surfaced with fine mineral aggregate and the underside is covered with a silicone release film that is removed during application.
Product Properties
- Installation Method Self Adhered
Installation
Prior to installation, unroll COLPHENE BSW V and allow to relax. Loose lay COLPHENE BSW V in desired position on approved prepared substrate. Once the membrane is in the desired location, remove the release film on the back side of the membrane and the DUO SELVEDGE side lap. Apply even pressure using a membrane roller over the entire surface, including the side lap to ensure adhesion. Once the self-adhered portion of the lap is adhered, a heat welding device is used to seal the lap. Refer to the SOPREMA® SBS Waterproofing Manual for additional application guidelines.
Related Products
COLPHENE® LM BARR Spray
COLPHENE LM BARR Spray is a single component, 95% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE LM…
View ProductALSAN TRAFIK PU 120
ALSAN Trafik PU 120 is a two-component, low VOC, low odor, liquid applied primer. This primer provides excellent inter-coat adhesion…
View ProductALSAN® RS PASTE
ALSAN RS PASTE is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) heavy paste. ALSAN RS PASTE is used to fill…
View ProductRelated Projects
Carrick High School – Pittsburgh, Pennsylvania
In 2017, Carrick High School’s roof was ready to be replaced. It was decided the best option was to tear off the previous roof and start fresh. Due to the relationship the architect, HHSDR Architects / Engineers, has with SOPREMA, the system that was selected to replace the previous roof included: SOPRA-ISO®, SOPRABOARD®, SOPRALENE® Flam Stick and SOPRALENE FLAM 180 FR GR.
San Francisco War Memorial – San Francisco, California
SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.