SOPREMA

Search

COLPHENE® LM BARR Spray SKU: W7527

COLPHENE® LM BARR Spray SKU: W7527

COLPHENE LM BARR Spray is a single component, 95% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE LM BARR Spray’s STPE moisture cure technology forms a continuous, tough elastic seal to the substrate that withstands extreme cold and high temperatures without cracking or softening. COLPHENE LM BARR Spray is ideal as a positive-side waterproofing for sealing foundations. It can also be used in between slab waterproofing, equipment wells, and other underground construction.

Product Properties

  • Installation Method 1 Part
  • Material Liquid
  • Technology STPE

Installation

COLPHENE LM BARR Spray should be used in temperatures above 35°F (2°C.) Maintain COLPHENE LM BARR Spray materials above room temperature before applying. Remove all dirt, oil, loose paint, water, frost and other contamination that can interfere with bonding. Form release residue and lime should be power washed and allowed to dry. COLPHENE LM BARR Spray may be applied to green concrete without outgassing. Although concrete cure times may vary with temperature, for optimum bonding, concrete cure time should be three to seven days. Application surfaces must be dry the touch and free of obvious moisture. Please refer to SOPREMA specifications and installation instructions for additional application guidelines prior to use.

 

Our Other Brands

Related Products

ALSAN® RS 210

ALSAN® RS 210 is a high performance, rapid-setting, polymethyl methacrylate (PMMA) resin. ALSAN RS 210 is utilized in conjunction with…

View Product

SOPRASLOPE™

SOPRASLOPE is a cementitious sloping material for use in approved multi-ply membrane and flashing assemblies. SOPRASLOPE is composed of an…

View Product

SOPRAWAY NG2

SOPRAWAY NG2 is an anti-fracture acoustic membrane intended for ceramic tiles floors. The SOPRAWAY NG2 membrane allows the direct application…

View Product

Related Projects

John R. Oishei Children’s Hospital – Buffalo, New York

SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.

University of Oregon Residence Hall – Eugene, Oregon

With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.