SOPRAFIX® BASE 614 SKU: 00433
SOPRAFIX® BASE 614 SKU: 00433
SOPRAFIX BASE 614 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 614 is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Mechanically Attached
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRAFIX BASE 614 onto the roof surface and allow to relax. Place SOPRAFIX BASE 614 in desired position. SOPRAFIX BASE 614 is mechanically fastened through the side laps using the appropriate fastener. Subsequent approved inter-ply or cap ply membranes are applied to SOPRAFIX BASE 614 via heat welding.
Testing & Approvals
Related Products
SENTINEL® UNIVERSAL SEALANT
SENTINEL UNIVERSAL SEALANT is a moisture-cured, polyether, elastomeric sealant for use in approved SENTINEL PVC membrane and flashing assemblies. SENTINEL…
View ProductINSONO AF3-90
INSONO AF3-90 is composed of self-adhesive elastomeric bitumen with an exposed non-woven polyester reinforcement. The underside is surfaced with a…
View ProductSOPRAFIX® 3″ PLATES
SOPRAFIX® 3″ Plates are specifically manufactured for use in SOPRAFIX Systems. The unique design, including barbs and ribs, provide exeptional…
View ProductRelated Projects
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.