SOPREMA

Search

ALSAN® TRAFIK RS 733 SELF-LEVELING MORTAR SKU: 00513770, 00513771, 00513772

ALSAN® TRAFIK RS 733 SELF-LEVELING MORTAR SKU: 00513770, 00513771, 00513772

ALSAN TRAFIK RS 733 Self-Leveling Mortar is created by combining ALSAN TRAFIK RS 733 Part A and ALSAN TRAFIK RS 733 Part B. ALSAN TRAFIK RS 733 Self-Leveling Mortar is a trowel-applied, rapid setting, polymethyl methacrylate (PMMA) resin-mortar used as a thick concrete patch prior to application of the ALSAN RS roofing systems or the ALSAN TRAFIK RS systems. ALSAN TRAFIK RS 733 Self-Leveling Mortar is also used as a traffic wear surfacing applied over ALSAN TRAFIK RS reinforced and unreinforced waterproofing systems.

Product Properties

  • Material PMMA

Installation

Thoroughly mix the entire pail of ALSAN TRAFIK RS 733 Part A (resin) for 2-3 minutes. Remove the ALSAN TRAFIK RS 733 Part B from the 7-gallon plastic pail, then pour ALSAN TRAFIK RS 733 Part A into the 7-gallon plastic pail. Using a slow-speed (200-400 rpm) mechanical mixer with a spiral agitator, slowly add the entire bag of ALSAN TRAFIK RS 733 Part B. Continue mixing for 2-5 minutes or until a smooth lump-free mortar is achieved. The mix ratio is 1 Part A (10 kg) to 2.3 Part B (23 kg).

Pour off and catalyze only the amount of material that can be applied within 10-15 minutes. Add ALSAN RS Catalyst based on published catalyst mixing rates. Once the catalyst is added to the mortar, mix for 2-3 minutes.

Apply the mortar to clean, prepared and primed substrate at the required coverage rate using a pin roller, stub roller, steel v-notch trowel or steel rake. Mortar should be uniformly spread across the substrate and rolled with a pin roller to knock down any high spots.

For complete application instructions refer to the ALSAN TRAFIK RS Trafficable Waterproofing Technical Manual

 

Testing & Approvals

Related Products

ALSAN® TRAFIK RS 733 PART A

ALSAN TRAFIK RS 733 Part A is a high-performance rapid-setting, polymethyl methacrylate (PMMA) resin. ALSAN TRAFIK RS 733 PART A…

View Product

ALSAN® TRAFIK RS 733 PART B

ALSAN TRAFIK RS 733 Part B (filler) is utilized in conjunction with ALSAN TRAFIK RS 733 Part A Summer or…

View Product

Related Projects

The Westin Savannah Harbor – Savannah, Georgia

The Westin was due for a roof replacement on 17,828 square feet of its property. To complete the project, SOPREMA’s SOPRAISO ™, DUOTACK®, SENTINEL® P-150, and ALSAN® RS 230 Flash were selected. These products allowed for the design to meet FM 1-120 codes and the use of ALSAN RS 230 Flash solved any difficult flashing details which was only one of many reasons
SOPREMA products were selected.

205 AVENUE C – New York, New York

SOPRASMART® laminated boards combine the roof membrane and coverboard into one installation layer, saving the installer time and labor. This patented product is the first and only in its category, bringing material savings to the equation as well.