COLPHENE® 180 SP SKU: 01219
COLPHENE® 180 SP SKU: 01219
COLPHENE 180 SP (sanded, polyolefin) is a SBS-modified bitumen membrane approved for use in waterproofing assemblies. COLPHENE 180 SP is reinforced with tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- Installation Method Cold Adhered
- Installation Method Heat Welded
- Reinforcement Non-Woven Polyester
- Thickness 87 mils (2.2 mm)
- Topside Sanded
- Underside Polyolefin Burn-Off Film
Installation
Prior to installation, unroll COLPHENE 180 SP onto the deck and allow to relax. Position COLPHENE 180 SP in desired position and back roll the product. COLPHENE 180 SP is then heat welded to approved substrates.
Testing & Approvals
Related Products
ELASTOPHENE® SANDED 3.0
ELASTOPHENE® Sanded 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded…
View Product
POLYFLEECE
POLYFLEECE is a proprietary non-woven polyester reinforcement used in the following waterproofing and flashings: ALSAN Flashing, ALSAN Coating AC 401,…
View Product
SOPRALAP FLAM
SOPRALAP Flam is an SBS-modified bitumen cover strip for use with SOPRASMART Laminated Board products. SOPRALAP Flam is reinforced with…
View ProductRelated Projects
170 East 77th Street – New York, New York
The fully reinforced system membrane included ALSAN RS 276 primer, ALSAN RS 230 field and ALSAN RS 230 flash reinforced with ALSAN RS fleece. ALSAN RS 233 self leveling mortar, a broadcast of #0 quartz silica aggregate and five distinct top coat colors finished off this incredible rooftop terrace.
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.